Get in Touch with Masstech
ISO9001 Certified
Marker Pen Machine
Marker Pen Making Machine for Whiteboard Marker Refill Assembly
Mass develops the MS-AM-065 marker pen making machine against the following specification. a 40-60 pcs/min refill assembly rate target, 2-up chain-carry horizontal setup, Mitsubishi PLC controllers, and SMC pneumatic components. It accommodates factories which need a consistent marker pen assembly line, not a system of marking and engraving, and not a hobby-sized pen turning shop.
MS-AM-065 at a glance
Output range40-60 pcs/min
Assembly mode2-up chain carry
Machine layoutHorizontal type
PLC brandMitsubishi
Pneumatic brandSMC
Machine size4500*1800*1500mm
40-60
marker refills per minute, product-file range
2-up
chain-carry assembly for balanced speed and access
4500mm
machine length for layout planning
5 days
stated replacement-parts courier target
Manual Marker Refill Assembly Bottlenecks – How Mass Automates Filling, Ink Saturation, and Line Flow
Marker manufacturing presents itself as a sequence problem rather than a speed problem before the speed problem even exists. The barrel, reservoir, ink, tip, cap, and final sealing together must arrive at each station in the proper orientation, and remain there long enough for the refill or reservoir step to appear stable.
External marker manufacturing insights dictate a sequence of barrel shaping, reservoir inserting, ink filling, sealing, and packaging. The MS-AM-065 translates that sequence into its 2-up chain-carry setup and its narrow enough to keep from crowding the tooling when time for adjustments arise. Narrow enough to quickly clear jams or change guides, check downfeeds, or modify pneumatic guides during a batch changeover.
Engineering note
Speed is not enough by itself for the MS-AM-065 to be a good choice. Does the equipment stay properly aligned as the marker refill, cap, barrel, and ink-related aspects stay within your defect limits?
Layer: What it means for marker production
Pain
Manual refill handling creates uneven pace, skipped checks, and operator fatigue.
Cause
Small components need repeatable orientation, controlled filling, and stable chain transfer.
Solution
Use a 2-up horizontal assembly machine with PLC control and pneumatic actuation.
Proof
Mass product data lists 40-60 pcs/min, Mitsubishi PLC, SMC pneumatic system, and chain-carry mode.
Mass MS-AM-065 Marker Pen Assembly Machine - Capacity, Components, and Factory Line Fit
The MS-AM-065 marker pen making equipment is appropriate for factories who are familiar with their marker pen design, and who need the system to run non-stop at a constant rate. The MS-AM-065 industrial filling equipment is brand new, fully automatic, and shipped overseas in a vacuum-sealed wooden container.
Capacity
40-60 pcs/min
Use this range for labor planning, upstream supply, and downstream packing checks.
Assembly mode
2 up, chain carry, horizontal type
Balances output with access for tuning, cleaning, and maintenance.
PLC
Mitsubishi
Gives controls teams a known PLC brand for diagnostics and spare planning.
Pneumatic system
SMC
Supports standard pneumatic service habits and replacement planning.
Dimensions
4500*1800*1500mm
Start layout checks with the machine envelope, then add operator and service clearance.
Certification
ISO9001
Quality-system signal for supplier review, not a substitute for your own acceptance test.
Factory layout check
Avoid only planning for the 4500*1800*1500mm envelope. Incorporate room for the addition of refill couplings, operator access, maintenance doors, reject clearing, and finished marker handling. Visual inspection, conveyor guards and covers, cleanliness monitoring, traceability monitors, pneumatic pressure monitors, and electrical motor monitors are additional recommendations for conveyor system operation maintenance.
Pre-quote utility snapshot
Ask for layout review before you freeze the factory plan. Split the stated 4500mm length, 1800mm width, and 1500mm height into a layout drawing, then add operator clearance, access for guards, and a reject-clearing path. Confirm whether your plant uses 220V, 380V, or another voltage before electrical design. Do not assume 85% shift efficiency until a sample run proves feeding, refill handling, ink saturation, cap fit, and packing transfer. For acceptance, specify whether the buyer wants a 1 hour dry cycle, a 2 hour sample cycle, or a 95% shift-efficiency target recorded during trial production. Treat the 2-year warranty, 24-hour response claim, and 5-working-day parts courier target as service terms to place directly inside the purchasing file.
Mass engineering view:
if your team cannot reach the guide, cylinder, or sensor during a fault, the quoted speed will not matter for long. Access is part of the output calculation.
Marker Pen Making Machine vs Manual Assembly - Output, Labor, and Consistency Comparison
Our 40-60 PPM Marker Assembly Fit Matrix turns your speed consideration into a linefit decision. You are now referencing a person to a machine as well as a part-handling manual process against organized feeding, chain transfer, pneumatic time triggered movement, PLC controls, and repeatable station access.
| Decision factor | Manual or semi-manual refill assembly | MS-AM-065 automatic assembly |
|---|---|---|
| Rated output basis | Depends on operator pace and fatigue | 40-60 pcs/min product-file range |
| Part transfer | Hand placement or simple fixtures | 2-up chain-carry horizontal transfer |
| Control method | Operator judgment and local switches | Mitsubishi PLC controlled sequence |
| Pneumatic actuation | Not fixed unless the buyer builds fixtures | SMC pneumatic components |
| Fault response | Fast human intervention, less process data | Better repeatability, but access and trained maintenance still matter |
| Best-fit production stage | Pilot runs, low-volume SKUs, uncertain design | Stable marker refill designs moving into repeat batches |
TCO readiness, not a guessed ROI
Automation budget proposals often omit facility build-out, compressed air systems, controls integration, spare component provision, operator training, technical writing, and first-year support materials. When those factors are relevant, the automation costing references present a total installed option to the visible marker manufacturing equipment proposal.
Want to test compare your present production line to 40-60 pcs/min?
Request a quote with custom output comparison
Whiteboard, Permanent, and Refill Marker Production
Choosing the Right Configuration
Different marker styles may run the same ink, tip, reservoir, cap, and refill path, but your manufacturing facility requirements will be worlds apart. A whiteboard marker line can get away with higher saturation and easier refill handling. A permanent marker program may need better sealing, solvent recycling, sealed cap connection, and no-leak failure modes.
Whiteboard marker refill assembly
Configuration
MS-AM-065 with refill feeding and ink saturation scope review
Why it matters
Matches the product file and the target page intent.
Permanent marker pen assembly
Configuration
Check cap, seal, and ink-reservoir requirements before quote
Why it matters
Permanent marker components can raise sealing and material questions.
Full marker production line
Configuration
Pair assembly planning with injection moulding and upstream equipment review
Why it matters
Mass also supplies injection moulding and pen making equipment.
New SKU or uncertain part design
Action Required
Send marker samples, drawings, and target pcs/min before selecting machine scope
Why it matters
Part geometry decides feeder, guide, and station design.
Marker Pen Machine Manufacturer Support for International Buyers
A new website has to gain confidence more quickly. Mass does this by concrete project scope support, not wild promises of manufacturing excellence: initial plant layout design, equipment part manufacturing, production line installation, actual on-site operator training, and following century support.
Support scope and language are also precise: a 2-year warranty on all machine parts; 24-hour engineer-response and replacement-part shipping by international courier within 5 working days. Overseas customers care more about these three details than another nonspecific aspiration for quality.
ISO9001
Listed in product data
2 years
Company warranty claim
24h
Engineer response claim
5 days
Parts courier target
Supplier qualification signals to ask for
Qualification criteria for automation equipment suppliers include technical specifications, certifications, FAT/SAT acceptance check lists, engineering support, maintenance, warranty, and support. Consider these criteria when you choose among Marker Pen Machine suppliers like Mass.
- Confirm marker sample, drawing, and refill dimensions.
- Ask for layout, air supply, voltage, and service-clearance drawings.
- Confirm spare-parts list and delivery path.
- Define factory acceptance and on-site acceptance tests before deposit.
Marker Pen Machine Price, RFQ Scope, Delivery, and After-Sales Terms
Pricing for marker pen machine must be quoted against scope. A short RFQ such as "send me a price for a marker pen machine" leaves excessive scope for misunderstanding. Assembly Magazine reports that detailed RFQs are part of avoiding rework and misunderstandings on automation projects with high ppm reject goals.
Pricing note
We do not publish a fixed USD price on this page because part design, planned station scope, controls, safety guarding, packaging, and installation scope can change the price. Request a line-fit quote when you can send marker samples and production targets.
Marker type
What to send Mass
Whiteboard, permanent, refill, highlighter, or another format
Reason: Controls part-contact surfaces and feeding method.
Target output
What to send Mass
pcs/min or pcs/day target
Reason: Checks whether 40-60 pcs/min fits your production plan.
Part data
What to send Mass
Drawings, samples, photos, barrel/refill dimensions
Reason: Reduces guesswork around guides, tooling, and grippers.
Factory utilities
What to send Mass
Voltage, compressed air, floor space, line direction
Reason: Prevents integration surprises after shipment.
Automation scope
What to send Mass
Refill assembly only, filling support, cap assembly, packing transfer
Reason: Separates machine price from full production-line cost.
Support terms
What to send Mass
Training, spare parts, warranty, remote support, engineer visit needs
Reason: Protects the first year of production.
ISO Certified Marker Pen Manufacturing
World-Class Quality Control
×
![Enlarged view]()
Safety, Guarding, and Acceptance Checks Before Shipment
Mass lists E-Stop controls, protective guards and maintenance signage for the machine. External guides to machine construction and operation explain why those factors are included as part of the RFQ: OSHA 1910.212 generally requires guarding to minimize the hazard present, for example from the point of operation, nip points, machine-rotating parts, flying chips, or sparks.
ANSI's list of additional points from ISO 13850:2015 includes the E-Stop angle: fast access, humans can do it, and need to reset before restarting. Perform those points during FAT and SAT, not as afterthoughts.
Acceptance item / Check before shipment
01
Emergency stop
Confirm location, reset behavior, and station response.
02
Guards and covers
Confirm access doors, moving-part guards, and operator reach zones.
03
Chain carry and guides
Run samples through enough cycles to find misalignment and jams.
04
Pneumatic pressure
Record operating pressure range and service points.
05
Spare parts
Confirm sensors, cylinders, wear parts, and OEM part numbers.
Facility Tour
Advanced Marker Pen Machine Manufacturing Facilities
RESOURCE CENTER
Advanced Marker Pen Assembly Tools
Marker Line Output Estimator
Estimate daily marker refill assembly output from the MS-AM-065 rated 40-60 pcs/min range.
RFQ Scope Builder for Pen Assembly Projects
Build the first RFQ outline before asking Mass for marker pen machine price.
40-60 PPM Marker Assembly Fit Matrix
Check whether MS-AM-065 is a practical first discussion for your marker assembly project.
FAQ for Marker Pen Assembly Machine Buyers
Product-data phrase is 40-60 pcs/min. Proceed as if that is a rated range, but verify actual output with the sample marker, the refill material and cap fit, the ink process, and your own operator plan, during acceptance testing.
Page is intended for whiteboard marker machine and refill assembly. Markers that must be permanently sealed against ink outgassing should be checked before quote against sealing, ink, and cap needs because the part loading behavior could alter the scope.
Public discussion points to the same balancing act as the Mass estimate: added tooling and detailed stations can increase cost, number of actuators, floor area, and maker adjustment complexity. Two-up arrangements may be ideal when the required output is well defined and access for trouble-shooting still desired.
Send us: samples or drawings (Pcs/min., product type, existing production process, automation to be achieved, voltage, compressed air parameters, floor space, support). Avoids RFQ detail distortion between the sides, especially where machine technology, feeding method and acceptance test are undefined.
Yes. Mass defines machine component procurement, machinery manufacturing, line deployment, operator instruction and post-sale service.
Brand-provided Terms state cover for 2-year machine parts, 24 hour engineer response and spare part delivery by international courier in 5 working days.
This is a marker pen manufacturing machine page for marker refill and assembly. not a dot-peen marker, laser-engraver, scrap lathe, pen-kit, or pen-turning machine.
Conditional. A Reddit production-line debate shows this is not always the case: some top layer handling remains manual when another automated subdivision does not pay back. For large quantities, providing an auto pack transfer may not be necessary until refill assembly stabilises.
